Providing new and used
machinery to aircraft
manufacturers worldwide

Par Systems 5 axis CNC Gantry router

Double click on above image to view full picture

Zoom Out
Zoom In

Par Systems 5 axis CNC Gantry router

Be the first to review this product

Availability: In stock.

$225,000.00
Add Items to Cart Add to Cart

Quick Overview

Par Systems / CIMCORP 5 axis CNC drilling cutting system
PAR model XR 225

Year of manufacture - 1993 / 1997-8 update w. router head installation & upgrades by PAR

Working Dimensions:
X axis, 30 feet / 9144 mm
Y axis, 12 feet / 3658 mm
Z axis, 5 feet / 1524 mm


Par Systems / CIMCORP 5 axis CNC drilling cutting system
PAR model XR 225

Year of manufacture - 1993 / 1997-8 update w. router head installation & upgrades by PAR

Working Dimensions:
X axis, 30 feet / 9144 mm
Y axis, 12 feet / 3658 mm
Z axis, 5 feet / 1524 mm

Head for five (5) axis capability: B axis (theta 2) has movement of 210 degrees- (105 +/- from 180 degrees) C axis 360 degree.

Machine head accepts the following “snap on” quick connect power modules:

IBAG Router Unit ( routing capability added in 1997 )
22.5 HP, 30,000 RPM
Manual tool load
Spindle cooling system and drive cabinet
Tooling: HSK 63, ER collets
Cutter station – 15 heads, electronic positioning “in-place” indicators
Shroud around spindle for dust & swarf collection.

EOA Drill Unit
6000 RPM
Software contain 50 sets of preforms with each schedule containing 40 drilling parameters Drill/Reaming/ Countersinking
Manage torque and thrust values of tools for dull bit detection
Broken bit sensor
Printing and plotting of torque and thrust values
Multi stack material drill/reaming
Drill control cabinet
Coupon drill/reamer & countersink testing area.

Cold Working End Effect Unit
West Coast Industries – Seattle, WA
…check out their website
WCI-H7000 Power Pak
7000 lbs. Hydraulic Pressure
Split mandrel system
Lube oil dispensing
Used for reaming and cold working fastening points

Renishaw Probe Unit
Dismantled and adapted to the IBAG spindle
Digitizing and part location, hole location, edge detection and tool to surface normalization.
IGES version IV conversion can be brought into a stand alone CAD system for graphic editing of digitized data collected.

Table to park, locate and change each unit.

Dust collection – Spencer Turbine Co. dust collector – separator.

Two (2) - vacuum work holding tables
Table 1 – Steel 14’ x 5’ with T slots & 10+10 vacuum ports (by KOMO)
Table 2 – Vacuum top surface with ”bleeder board” , 10’ x 5’ for single sheet, 3 axis drilling / flat pattern routing (by Thermwood)

Thermwood 40 HP vacuum system

PAR Systems DOS based, CNC control system, desk and pendant machine function hand controller.
Perimeter safety sensors
All manuals
Add Your Tags:
Use spaces to separate tags. Use single quotes (') for phrases.

Fluid Forming Technologies, LLC
1 Brush Hill Road, Suite 318, New Fairfield, CT 06812, USA
Tel: (203) 746-6409 • Fax: (203) 746-2199

Copyright © 2012 Fluid Forming Technologies, LLC. All rights reserved.

Mobile Site | Back To Top